Pumaboard Options
Pumaboards are built with the customer in mind. Some options come with the original price of the board (which is determined by the size of the board), while others cost extra. An asterisk (*) signifies an option only available for Pumaboard Classics.
Included in cost
Extras
Sizes and Prices
Prices are based on the size of the board and which style it is (shipping and insurance are $25 extra). The dimension choices represent the overall sizes of boards; the actual surface area will be 1 inch less, width and length. All boards have a depth of 15 inches. The Pumaboard Classic is 4 1/8 inches tall in the front and 2 inches tall in the back. The Pumaboard Low Rider is 2 inches tall all the way around.
Also, remember that this is just a guideline for sizes. These sizes are the ones listed on the order forms, but custom sizes are available at prices comparable to the ones shown. For custom sizes, you will specify in the order form, and I will reply with a quote.
| WIDTH | CLASSIC | LOW RIDER |
|---|---|---|
| 18" | $150.00 | $100.00 |
| 20" | $160.00 | $110.00 |
| 22" | $170.00 | $120.00 |
| 24" | $180.00 | $130.00 |
| 26" | $190.00 | $140.00 |
| 28" | $200.00 | $150.00 |
| 30" | $210.00 | $160.00 |
| 32" | $220.00 | $170.00 |
| 34" | $230.00 | $180.00 |
| 36" | $240.00 | $190.00 |
Board Frame
Several different colors of Tolex are available to cover the frame of your board. They are Marshall Black Elephant Hyde, Marshall Purple Elephant Hyde, Marshall Red Elephant Hyde, Marshall White Levant, Marshall Red Levant, Marshall British Green Levant, Marshall Orange Levant, Fender Black (Old Style), Fender Cream (Vintage Smooth), Mesa/Boogie Black Taurus, Vanilla Taurus, and Wine Taurus. The color chart is available here (opens in a pop-up window).
Tops
[Please note: piping is no longer available.]
Both Pumaboard Classics and Pumaboard Low Riders can be made with black Velcro Loop Fabric tops. Pumaboard Classic tops can also be made with white Formica or black Formica at a cost of $20 extra.
Metal Corners
[Please note: piping is no longer available.]
Metal corners will be added to your board free of charge. They can be either nickel or black.
Grommet
On Pumaboard Classics only, I can add a hole with a grommet to your board free of charge. There are 3/4" grommets and 1.25" ones (that measurement refers to the inside diameter of the grommet). The 1.25" grommets allow for a 3-prong plug to pass through in addition to DC cables. The 3/4" grommets are too small for a 3-prong plug but big enough for other cables. The grommet will be positioned with the center of the hole 1.75 inches from the front of the board, and centered.
Soft cases
Add a soft case from Studio Slips for your board! Briefcase-style with handles, shoulder strap and accessory pocket, in black or brown (see photos here and here). Prices are as follows. Sizes correspond with board sizes. You have the option of specifying a custom case size, if you are ordering a custom board size or for any other reason.
For Pumaboard Classics:
| WIDTH | STANDARD | STANDARD CASE W/ |
|---|---|---|
| CASE | DOUBLE PADDING | |
| 20" | $130.00 | $155.00 |
| 22" | $135.00 | $165.00 |
| 24" | $135.00 | $165.00 |
| 26" | $135.00 | $165.00 |
| 28" | $135.00 | $165.00 |
| 30" | $145.00 | $180.00 |
| 32" | $145.00 | $180.00 |
| 34" | $150.00 | $185.00 |
| 36" | $155.00 | $190.00 |
For Pumaboard Low Riders:
| WIDTH | STANDARD | STANDARD CASE W/ |
|---|---|---|
| CASE | DOUBLE PADDING | |
| 20" | $130.00 | $155.00 |
| 22" | $130.00 | $155.00 |
| 24" | $135.00 | $165.00 |
| 26" | $135.00 | $165.00 |
| 28" | $135.00 | $165.00 |
| 30" | $135.00 | $165.00 |
| 32" | $135.00 | $165.00 |
| 34" | $145.00 | $180.00 |
| 36" | $145.00 | $180.00 |
Racing Stripes
Racing stripes are optional. They offered in the same colors of Tolex as the frame, and cost $25 extra. There are two styles of racing stripes; the S.S. stripes are two even stripes close to each other, and the rally stripe is one wide stripe with a small stripe on each side. Check the photo gallery for examples.
Handles
To make the board easy to carry, I have handles available for $15 extra. They come in either black or chrome.
Power Socket and A/C Outlet
On Pumaboard Classics only, I can install a round, recessed power socket and/or a round, recessed A/C outlet in your board. Each one is $25 extra. They are installed on either side of the board, used for plugging a regular extension cord into the board for power.
Neutrik 1/4-inch jacks
On Pumaboard Classics only, for $15 each, I can install up to four Neutrik 1/4-inch jacks on each side of the board, for inputting and outputting. You will specify their locations for me.
Patch cord
For an additional $10 for Pumaboard Classics, I can include a patch cord. If ordered along with a power socket, the patch cord will come installed in your Pumaboard. A patch cord will give you the neccesary cord from the back of the power socket to plug into a PPII.